Powder grinding plant process introduction:
Grinding system composed with jaw crusher, bucket elevator, electromagnetic feeder, grinding unit, blower, analyzer, cyclone powder collectors, bag filters, pipes and electrical cabinet parts. According to customer demand can adopt Raymond mill, YGM high pressure grinding mill, , HGM micro powder grinding mill, MFW Euro grinding mill.
Raw material is crushed by jaw crusher then elevated into a hopper by bucket elevator, through the electromagnetic vibrating feeder evenly and continuously into the grinding chamber for powder-processing. Finally powder enter into analyzer for separating under the function of blower, qualified fine powder go to cyclone collector and discharged from pipes into storage silo, unqualified powder drop back into grinding chamber for re-grind.
Whole process is under negative pressure formed closed airflow loop. Cyclone collector bottom equip air-valves, isolated outside air from inner air, increase grinding efficiency heavily. Besides, few dust and air going up to dust collector for pure, filter, more friendly for environment.
Equipment Configuration | |||||||
---|---|---|---|---|---|---|---|
Grinding mill | YGM75 | YGM95 | YGM130 | YGM160 | YGM190 | ||
↓Relative equiments | Capacity → | 0.8-1.5t/h | 2.5-4t/h | 4.5-7t/h | 7-11t/h | 11-15t/h | |
Grinding mill Power | Main Grinder | 18.5 | 45 | 90 | 132 | 185 | |
Blower | 15 | 37 | 90 | 132 | 185 | ||
Classifier | 2.2 | 5.5 | 7.5 | 15 | 22 | ||
Jaw Crusher | Model | PE150X250 | PE200X350 | PE250X400 | PE250X750 | PE250X750 | |
Power(Kw) | 5.5 | 7.5 | 15 | 22 | 22 | ||
Input size (mm) | ≤130 | ≤150 | ≤210 | ≤210 | ≤210 | ||
Output size (mm) | 15-45 | 15-55 | 25-60 | 25-60 | 25-60 | ||
Elevator | Model | T210 | T210 | T250 | T315 | T400 | |
Power(Kw) | 3 | 3 | 3 | 4 | 4 | ||
Feeder | Model | GZ-2 | GZ-4 | GZ-4 | GZ-5 | GZ-5 | |
Power(Kw) | 0.15 | 0.45 | 0.45 | 0.65 | 0.65 | ||
Silo | According to the actual situation,we will guide to make. |